In my last column, I made a last-minute addition referring to approval of major repairs and modifications for importing of aircraft from the USA. After reading FAA documents including 8110.37E, 8300.10, 8300.14, the Canada\/USA Bilateral Agreement with its related documents and some of the numerous advisory and guidance documents available, I can only add a few notes.<\/p>\n
The FAA seems to have removed some of the designatied engineering representative (DER) authorities and added others. They have implemented a new delegation called a Repair Specification DER (RS-DER) and a new level of approval document called a Repair Specification Title and Signature Page. At the same time, they seem to have reduced the level of repair approval that an 8110-3 form may be used for. Now, this form has a myriad of guidance documents that bounces it back and forth amongst the FAA Aircraft Certification Office (ACO), DERs and RS-DERs. They have also added in the term \u201cCritical Parts\u201d to the mix of factors of \u201cMajor Repairs\u201d and \u201cMajor Alterations\u201d to be considered before approval. After talking to a couple of DERs, I am wondering if anyone out there in readerland is capable of providing a definitive explanation of how this FAA system works. Do you know where Niverville is?<\/p>\n
Well neither did I until we received a letter from \u201csemi-retired\u201d Roger Beebe, a long-serving executive with Transport Canada saying \u201chello\u201d. \u201cHello\u201d to you Roger and all of the other Aircraft Maintenance Engineers (AME) residing along the historical Red River. He goes on to state, \u201cAfter all these years, I still have a great interest in the future of AMEs.\u201d Unfortunately there are too few of us who are interested in the future and are willing to work to improve things.<\/p>\n
I received a follow up letter from Norm Paterson (ref. AMU April\/May 2012) stating: \u201cI am still a little fuzzy on replacement times for equipment such as oil cooler hoses not listed in 625 App C.\u201d He refers to manufacturers\u2019 manual and bulletins that seem to mandate replacement.<\/p>\n
That\u2019s the way it was before the CARs. You were required to follow the \u201cmanufacturer\u2019s recommendations\u201d. The oddest situation I had was with an AME who took manufacturer X\u2019s \u201ctime expired\u201d cooler and put it on manufacturer Y\u2019s aircraft \u2013 one which had no life limit on the cooler. The same applied to hoses. Appendix C changed that.<\/p>\n
For outright replacement of parts, Appendix C of Standard 625 only addresses transmitter batteries. All documents that mandate replacement of parts are regulatory documents and include Airworthiness Directives, Type Certificate Data Sheets and other documents mandated in those Data Sheets. These parts are normally referred to as life limited parts.<\/p>\n
For non-replacement maintenance tasks such as calibration, inspection and overhaul, you must consult the individual aircraft Maintenance Schedule Approval (MSA) as approved by TC or extracted from Standard 625 Appendix B. I have seen some TC Inspectors require some stuff to be added, but many times it was not supported in regulation or by TC official policy. That ought to be challenged if you see it as a local requirement and an unnecessary burden. That\u2019s all there is on that part of the topic.<\/p>\n
For your actual work, the manufacturer\u2019s instructions come into the picture. CAR 571.02 mandates compliance with manufacturer\u2019s recommendations for techniques, practices, parts, materials, tools, equipment and test apparatuses (or equivalent). Replacement or overhaul times specified in documents issued by the manufacturer such as \u201cMandatory Service Bulletins\u201d are not mandatory per the CARs but once again I urge due diligence.<\/p>\n
Further to this subject, Norm asks about liability implications. He states that \u201cthe list of continuing airworthiness tasks and replacements is very large.\u201d He\u2019s right on with that. If you are working on one type of aircraft, the pile of documents to consider is large. If you\u2019re working on three types of aircraft, your pile of documents will be about three times as big. I\u2019ll repeat myself here and state that legal requirements are a different world from liability. Requirements are what I write about. For liability, nothing is for certain until the Supreme Court has made a ruling on the matter. On that, all I will tell you is to maintain your highest standard and use your best judgment to exercise DUE DILIGENCE. For more on that, refer to AMU\u2019s April\/May 2012 issue.<\/p>\n
To the above, I\u2019ll add the \u201crequirement\u201d to have insurance coverage. We are all always open to lawsuits in civil court. A friend of mine suffered incredibly and, metaphorically speaking, lost the farm because of a lack of complete insurance coverage extending to the area of \u201cErrors & Omissions\u201d coverage. Using your \u201cbest judgment\u201d and \u201chighest standards\u201d regarding due diligence is very important but also get insurance that addresses all of your needs. For this, find an insurance company that specializes in aviation. This area of insurance is like every other topic under the sun: there is a plethora of \u201cexperts\u201d out there but few who know what they are talking about. Ask around the industry to find a knowledgeable person with the product to suit your needs.<\/p>\n
Regarding civil liability, I\u2019ll use a metaphor of the advice to hikers for protection against grizzly bears. Always wear bells on your person to signal to the bears that you are near and give them plenty of time to run away. Carry a can of pepper spray to chase them off if they still bother you. Further to this, autopsies on fat bears can find stomach contents of bells flavoured with pepper.<\/p>\n
A letter from Dennis Lyons of Fast Air takes us back to the AMU June\/July issue and asks for some corrections or clarifications. His first point is regarding some confusion that arises from my usage of the Small Operator Maintenance Control Manual (SOMCM) as an example. I did state that \u201cFor AMOs this is not any help\u201d which was not correct in all cases. The SOMCM training requirement regarding elementary work and servicing might be used as an example for Approved Maintenance Organizations (AMO) that want to delegate these tasks to unlicensed personnel.<\/p>\n
The second half of that paragraph clarifies my point somewhat but here is some expansion on that. Many years ago (for the young readers, after the dinosaurs but before SMS) all approved companies had \u201cMaintenance Control Manuals\u201d or MCMs. With evolution to the \u201cnew\u201d Canadian Aviation Regulations, Transport Canada (TC) wisely termed the manual applicable to AMOs as a Maintenance Policy Manual (MPM) to limit confusion. The term Maintenance Control Manual was retained in CAR 706 for air operators operating commercial air services. These are commonly referred to as AOCs for a commercial Air Operator Certificates issued under the 700 series of the CARs. To this mix of MCMs for AOCs and MPMs for AMOs, we add the SOMCM for SOAOCs (say that fast). The SOMCM was produced by TC to help small and start up AOCs produce an MCM. Up there in the thin atmosphere of Ottawa, airlines get the most attention and AMOs are put on the back burner to languish without similar assistance. As a further note, the initialisms used, such as MCM, are used in the regulations as a convenience to reduce text. You can give your manual any name you want, for example, Quality System, Quality Management, etc.<\/p>\n
In the event that some servant of the Minister is reading this, (don\u2019t get caught), please consider extending a helping hand to AMOs by publishing a generic MPM for small AMOs or a SAMOMPM.<\/p>\n
The second point Dennis raises is regarding the Standard 573.06(5) \u201cthree year requirement\u201d for update training as a \u201cfixed period\u201d. He mentions with a \u201crobust QA system (which all mature companies should have) you can move from a fixed period of time to a competency-based system of update training\u201d. This three year period is not a fixed period that must be adhered to but is a maximum period of time allowed for a minimum amount of training. Before this requirement, most companies did little or no training given the choice. Now you must not exceed three years without update training. If you want to do more training or have a shorter cycle then go ahead and do training that exceeds this. As I stated previously, 24 hours in a year seems to be widely accepted as a minimum for personnel with aircraft certification authority (ACA). If you want to do less, submit a manual amendment to TC.<\/p>\n
Now for something completely different. This is on the topic of MPM and MCM composition. Many people are still in the mode of the old Engineering & Inspection Manual (E&I Manual), when approved manuals were huge. TC inspectors required all manner of requirements to be written into the old MCMs because that was the only place that airworthiness requirement could be mandated. The Air Regulations and the Air Navigation Orders (ANOs) contained almost nothing. What was required was that the manuals be approved. That was how requirements like stores, documentation and quality control were mandated. We required companies to list these items under the duties of various personnel in the company, primarily the Chief Engineer and the Chief Inspector.<\/p>\n
Nowadays I see similar things going on in modern MPMs and MCMs including long and drawn out job descriptions. Under current regulations, job descriptions and numerous other examples are not required. What is now required is specified in the standards: for specifics, AMOs refer to Standard 573.10(1) and for AOCs refer to Standard 706.08(1). Following those two referenced areas are instructions for the implementation of \u201cdocuments incorporated by reference\u201d. These are the procedures, process specifications and forms that companies need in order to provide detailed control of their day-to-day operations. These additional documents are approved by the company PRM, or a delegate, and can be revised when needed but always in conformance with the policies of the TC approved manual. This is not an easy way to escape requirements. The policies in the TC approved manual must be clear enough to guide the development of the referenced documents which, in turn, must be complied with. These documents must not be allowed to contradict each other.<\/p>\n
I seem to be running out of time this month, so here I\u2019ll leave you. Be good and remember Due Diligence.<\/p>\n
Please be aware that I am not a lawyer or legal expert. What I write in my column is not legal advice nor legal opinion. If you face a legal issue, you must get specific legal advice from a lawyer, and preferably one with experience in the aviation matters in your own country. In my last column, I made a last-minute addition referring to approval of major repairs and modifications for importing of aircraft from the USA. After reading FAA documents including 8110.37E, 8300.10, 8300.14, the Canada\/USA Bilateral Agreement with its related documents […]<\/p>\n","protected":false},"author":5,"featured_media":190,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[9,8,13],"tags":[],"class_list":["post-207","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-features","category-11-03","category-the-regs"],"_links":{"self":[{"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/posts\/207","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/amumagazine.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=207"}],"version-history":[{"count":18,"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/posts\/207\/revisions"}],"predecessor-version":[{"id":209,"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/posts\/207\/revisions\/209"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/amumagazine.com\/index.php?rest_route=\/wp\/v2\/media\/190"}],"wp:attachment":[{"href":"https:\/\/amumagazine.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=207"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/amumagazine.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=207"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/amumagazine.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=207"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\n<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"